Photocatalytic Coatings

!

Unpolluted air

Photocatalytic surfaces present excellent results in reducing the pollution inside buildings. Additionally, photocatalytic surfaces on the outside walls of the houses act as a shield to prevent the entrance of dirty outside air.

!

Clean Surfaces

The main cause of dirt on the walls of our homes, both inside and outside, is the gradual accumulation of particles and pollutants on them, the same pollutants our families and we are breathing continuously.

!

Bactericide

Photocatalytic surfaces prevent the growth of microorganisms and do not allow the accumulation of substances from which they feed. Therefore they are very effective against attacks from bacteria, fungi and microorganisms in general.

!

Odorless

Photocatalytic surfaces do not emit any odour, because they destroy the harmful compounds that produce them. In our case, the absence of odour indicates the purity and cleanliness of the air entering our lungs.

!

Healthy families

People who live in urban environments suffer more respiratory problems and even have a lower life expectancy than that of people living in areas with clean air. Photocatalytic walls perform the same purifying function as forests and grasslands. They even use the same energy source: light.

!

Aire sin contaminación

Additionally, photocatalytic surfaces on the outside walls of the houses act as a shield to prevent the entrance of dirty outside air.

!

Clean Surfaces

The main cause of dirt on the walls of our homes, both inside and outside, is the gradual accumulation of particles and pollutants on them, the same pollutants our families and we are breathing continuously.

!

Bactericide

Photocatalytic surfaces prevent the growth of microorganisms and do not allow the accumulation of substances from which they feed. Therefore they are very effective against attacks from bacteria, fungi and microorganisms in general.

!

Odorless

Photocatalytic surfaces do not emit any odour, because they destroy the harmful compounds that produce them. In our case, the absence of odour indicates the purity and cleanliness of the air entering our lungs.

!

Healthy families

People who live in urban environments suffer more respiratory problems and even have a lower life expectancy than that of people living in areas with clean air. Photocatalytic walls perform the same purifying function as forests and grasslands. They even use the same energy source: light.

Photocatalytic Coating Advantages

Photocatalysis is effective against many toxic substances, including:

!

Polluting gases

Nitrogen Oxides (NOx), Sulfur Oxides (SOx), Carbon Monoxide.

!

Toxic substances

Formaldehyde, Methanol, Ethanol, Benzene, Toluene, etc.

!

Organic substances

Like microbes and bacteria.

!

Fine particles

PM2.5, PM5 and PM10.

!

Odor

Bad smells and fumes

These organic and inorganic substances are transformed by the photocatalytic process into compounds totally harmless to people’s health, in the same way that nature does thanks to the sun and plants.
The inorganic compounds incorporated into the photocatalytic products are mainly titanium oxides, which are also used in sun creams, toothpastes, and a good number of cleaning and cleaning products.
Our products and photocatalytic paints are manufactured in Spain under our own patent. We carry out the technical and commercial development from MyPHor Special Materials.

What is a Photocatalytic Coating?

Photocatalytic coatings use the properties of a process called photocatalysis, which is a natural phenomenon in which a substance uses the energy of light to eliminate pollutants and harmful compounds.

MyPHor´s photocatalytic coatings and products, manage to transform the polluting substances, bacteria and fungi that are in the environment, into harmless materials.

Photocatalytic Coatings in Families 

Many parents when they look for the quality of life of their families consider many factors, but do not take into account the quality of the air they breathe. Being surrounded by a clean and healthy environment is important both to achieve a better environment and to improve health by reducing respiratory conditions and allergies.

The technology to achieve this is already a reality and can be achieved easily by photocatalytic paints.

MyPhor Photocatalytic Coatings

Our paints and photocatalytic products are completely standard since they are acrylic, water-based paints, and do not contain any toxic compounds in their formulation. They accept any color of the NCS color chart. Myphor photocatalytic paints are applied just like any paint, they are clean products, they purify contaminated environments, they favor the environment, they improve people’s health, their effect is permanent and they save money by keeping clean. In the absence of light they behave like high quality paints, and in the presence of the same they activate and provide the additional benefits mentioned.

These are the photocatalytic products of Myphor:

INDOORS

Washable photocatalytic coating for interior walls. It comes in a range of standard colours.

Photocatalytic breathable coating for roofs. It comes in a range of standard colours.

Photocatalytic lacquer, ultra-washable, for indoors. Offered in egg-shell finish, for use on baseboards.

OUTDOORS

Premium Photocatalytic coating for outdoor facades, with anti carbonation properties.

Potassium-silicate based photocatalytic coating based outdoor potassium silicate. Colors on request.

Photocatalytic Coating for tunnels.

Invisible Photocatalytic treatment, for asphalt pavements.

SURFACES

Solución transparente para el tratamiento Fotocatalítico de cristales.

Invisible photocatalytic treatment, for prefabricated, exposed brick, stone, concrete, mortar and glass surfaces.

Solución para el tratamiento Fotocatalítico de superficies porosas de colores claros.

Invisible photocatalytic treatment for glass surfaces and solar panels.

MORTARS

For the preparation of photocatalytic paving for pedestrian or cycle tracks.

Fine photocatalytic mortar for finishing facades.

Photocatalytic quartz for the superficial finish of concrete pavements.

Photocatalytic coating for second-generation asphalt driveways, compact paving, drains or sound absorbents.

PRIMERS

Primer for PhotoDeco, PhotoLacq, PhotoWall, PhotoTunnel.

Primer for PhotoSiloxane

Primer for PhotoSilicate.

MyPhor Photocatalytic Coatings

Our paints and photocatalytic products are completely standard since they are acrylic, water-based paints, and do not contain any toxic compounds in their formulation. They accept any color of the NCS color chart. Myphor photocatalytic paints are applied just like any paint, they are clean products, they purify contaminated environments, they favor the environment, they improve people’s health, their effect is permanent and they save money by keeping clean. In the absence of light they behave like high quality paints, and in the presence of the same they activate and provide the additional benefits mentioned.

These are the photocatalytic products of Myphor:

INDOORS

Washable photocatalytic coating for interior walls. It comes in a range of standard colours.

Photocatalytic breathable coating for roofs. It comes in a range of standard colours.

Photocatalytic lacquer, ultra-washable, for indoors. Offered in egg-shell finish, for use on baseboards.

OUTDOORS

Premium Photocatalytic coating for outdoor facades, with anti carbonation properties.

Potassium-silicate based photocatalytic coating based outdoor potassium silicate. Colors on request.

Photocatalytic Coating for tunnels.

Invisible Photocatalytic treatment, for asphalt pavements.

SURFACES

Solución transparente para el tratamiento Fotocatalítico de cristales.

Invisible photocatalytic treatment, for prefabricated, exposed brick, stone, concrete, mortar and glass surfaces.

Solución para el tratamiento Fotocatalítico de superficies porosas de colores claros.

Invisible photocatalytic treatment for glass surfaces and solar panels.

MORTARS

For the preparation of photocatalytic paving for pedestrian or cycle tracks.

Fine photocatalytic mortar for finishing facades.

Photocatalytic quartz for the superficial finish of concrete pavements.

Photocatalytic coating for second-generation asphalt driveways, compact paving, drains or sound absorbents.

PRIMERS

Primer for PhotoDeco, PhotoLacq, PhotoWall, PhotoTunnel.

Primer for PhotoSiloxane

Primer for PhotoSilicate.